Nail Polisher 206A :

1. Check Voltage:
   Ensure the input voltage matches the voltage indicated on the backside of the power box before connecting to the power source.
2. Earth Connection:
   Confirm the socket is properly earthed for safe operation.
3. Setup Connections:
   • Plug the portable polisher into the output socket on the power box.
   • Connect the foot pedal to the designated socket on the backside of the power box.
4. Adjust Speed:
   Set the speed controller to the minimum position before switching on the device.
5. Switch On:
   Turn on the power. The indicator lamp should light up, and the polisher head will start to rotate slowly.
6. Increase Speed:
   Use the speed controller to gradually increase the speed to the desired level.
7. Foot Pedal Operation:
   • Switch to “FOOT” mode to enable foot pedal control.
   • Speed increases as you apply more pressure to the foot pedal.
8. Check Indicator Lamp:
   If the indicator lamp does not light up during operation, inspect the fuse and replace it if necessary.
9. Power Off:
   Turn off the power if the polisher will not be used for an extended period.
10. Safety Precautions:

• This appliance is not intended for use by individuals (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge unless supervised or instructed by a responsible person.
• Ensure children do not play with the appliance.